服务热线: 400-777-9110
中国优秀自主研发制造商
产品名称: TQ-3015A
产品名称:

TQ-3015A

上市日期: 2020-02-14
  • 产品概述
  • 产品规格
  • 产品应用
  • 关联案例
  • 关联方案

TQ-3015A is a portable, functional, convenient Ethernet Tester with a set of E1, V.35, 10M/100M/1000M Ethernet, multiple physical interfaces for power meter test and fiber length test and full Chinese operation interface,  which show the success or failure of the test statistics directly to help the engineering and maintenance personnel Perform on-site installation, commissioning and maintenance well, meanwhile, save them lots of time.


TQ-3015A


Features

10M/100M/1000M Ethernet Test

◆ High Speed IP Ping test

◆ Provide RFC2544(throughput, delay, bit loss rate, back-to-back) function tests

◆ Y. 1564 (service configuration test and service performance test)

◆ IP address Lookup

◆ DFTP server to test Up/Downlinks channel bandwidth

◆ Optical / electrical interface supports 850nm/1300/1310/1550nm


E1 / V.35

◆ Provide E1 、V.35 port

◆ Support BERT error feature testing(G.821、G.826、M.2100/550)

◆ Support Frame Relay、 HDLC、PPP protocol testing

◆ Support E1 Ping & loopback Ping test

◆ Automatic detection IP address (HDLC/PPP/FR)


Optic Power Meter Test

◆ Wavelength:  850nm/1300nm/1310nm/1550nm/1625nm

◆ Output: +10 ~ -70dBm


Fiber Length Test

◆ Quickly and accurately detect the location and type of fiber-optic cable

◆ Full line breakpoint test range 0 ~ 60km

◆ Support 1310nm/1550nm...Wavelength


OTDR Test

◆ Quickly and accurately detect the location and type of fiber optic cable fault points

◆ Testing range: 0 ~ 80km

◆ Graphical interface

◆ Support detection of line total loss,events point loss and attenuation values per kilometer


VFL Test

◆ Test distance: 8~10 km


Performance

Port

◆ Datacom Port: V.35 function

◆ E1 Port: E1 link, meet G.703(E1) test function

◆ Ethernet Port: 10M/100M/1000M/10G Dual optical Ethernet ports、10M/100M/1000M Dual electric 、optical    Ethernet ports

◆ Optic Power Meter Port


10/100/1000M

TQ-3015A


Ethernet main test items:

◆ Dual 10G optical Ethernet, Dual 1G optical Ethernet/Dual 1G electric Ethernet, optical port support
850nm/1300nm/1310nm/1550nm

◆ Automatic recognition of 10/100/1000M network service

◆ DHCP

◆ RFC2544( (throughput, delay, bit loss rate, back-to-back) function tests

◆ Y.1564 Test

◆ Support 24hrs Throughput test

◆ Lookup IP

◆ DFTP Server & DFTP Client

◆ Measurement Bandwidth

◆ Full Speed PING

◆ Tracert Function

◆ ARP Scan

◆ Provide IP layer、 MAC layer, Physical layer BERT Test

◆ Provide IP layer、 MAC layer, Physical layer PDV Test

◆ 24 hours flow monitoring function

◆ SDT

◆ 8 Traffic Generator & Multiple Traffic Generator

◆ Optical Module Test

◆ Loopback

◆ Port Location

◆ Capture Frames

◆ Web Browsing

◆ Cable Test

◆ EFM OAM(802.3ah) 


Technical Specifications

TQ-3015A

TQ-3015A


E1

E1 interface error test and IP Ping (PPP/HDLC/frame relay) function test sketch

TQ-3015A


Testing Purposes:

1、Loopback test E1 Link Bit Error Ratio Rate and Transmission Performance

2、Test whether Loopback IP and Ping link is smooth

3、E1-line monitor whether there is a physical layer link error


Specific indicators are as follows:

◆ Test rate: 2.048Mbps, N (continuous) and M (discontinuous) x 64Kbps (N & M = l to 31) Insert
/ remove N or M x 64kbps

◆ Line Code: HD83 & AMI

◆ frame type: Non-framing, PCM-30, PCM-30c, PCM-31, PCM-3lc, conform to ITU-G.704

◆ Online, offline test function 


Transmitting end

◆ Clock source, internal clock: 2.048MHz±5ppm 

◆ Reception: the received signal is locked 

◆ Line Code: HD83 & AMI

◆ Pulse waveform: conforms to ITU-TG.703

◆ Error insertion: BIT, CODE, BIT+CODE; single or 1xl0-1 to 1xl0-7 rate 


Receiving end 

◆ Frequency range: 2.048Mbp±8000bps

◆ Input sensitivity: 0-43dB

◆ Return loss performance conform to ITU-TG.703, jitter resistance

◆ Conform to ITU-TG.823


Measurement

◆ E1 receives the signal level

◆ El receiving frequency measurement

◆ El interface voltage

◆ Code / BPV error (error count and ratio)

◆ Frames errors (FAS, MFAS and CRC-4 error counts and error ratios) LOS, Sync loss, LOF, AIS, FAS, RAI and MFAS seconds

◆ Count G.821 analysis, G.826, M.2100 measurement, E-bit Error count and ratio

◆ Support PPP, HDLC Layer 2 routing protocol analysis

◆ Automatically detect router IP addresses

◆ Fast traffic IP Ping test and loopback ping


V.35

V.35 interface error test and IP Ping (PPP / HDLC / frame relay) function test diagram: 

TQ-3015A


Testing Purposes:

1、The instrument automatically detects the type of remote router protocol and IP address, and performs IP Ping

function to connect the test function.

2、V.35 link layer error test.


◆ Test rate: N x 64Kbps (N = 1-31)

◆ Using V.35, DCE / DTE access mode & V.24 Synchronous test mode to test pattern

◆ PRBS: 2n-1, n = 9,11,15,20,23, in accordance with ITU-T0.152

◆ The testing of BERT bit error characteristics is in accordance with G.821 analysis.

◆ Provide V.35 / V.24 monitoring function

◆ Support PPP, HDLC two-tier routing protocol analysis

◆ Automatically detect router IP addresses

◆ Testing about fast traffic IP PING function and loopback PING 


Frame Relay Parameters

◆ Support E1, V.35 physical interface

◆ UNI DTE / DCE Frame Relay Monitoring and Simulated Client (CPE) testing

◆ Compliance with standards: ITU Q.933, ANSI T1.618 / T1.617 CISCO LMI, LMI analysis, PVC status.

◆ DLCI Statistics (while providing 32 DLCI)

◆ Testing about CIR service quality

◆ Timers: T391, T392, N391, N392, N393

Performance statistics

◆ Automatically detect router IP addresses

◆ Support the automatic detection of link IP address and the testing of fast flow IP PING function 


Optical Power Meter Test

'Independent Interface Power Meter Test schematic diagram' as follows:

TQ-3015A

◆ Advantages: By independent interface testing optical power, optical power meter measurement accuracy is much

◆ higher than the optical SFP optical module carrying the power module

◆ Test wavelength: 850nm / 1300/1310/1550 / 1625nm

◆ Support interface: FC / SC / ST / LC

◆ Test range: +26 ~ -50dBm or +10 ~ -70dBm

◆ Detector Type: InGaAs

◆ Accuracy: ± 0.01dB 


Fiber Length Test

'Fiber length test diagram' is as follows

TQ-3015A

◆ Light source wavelength (nm) 1550±20

◆ Fiber type: 9 / 125μm

◆ The maximum measuring distance: 60km

◆ Reflection event dead zone:15m

◆ Distance accuracy: ±(2m+2*0.1%*distance)

◆ Pulse width: automatic adjustment 


OTDR Test

TQ-3015A

◆ Wavelength( nm) : 1550± 20

◆ Fiber type: 9/125 m

◆ Max. Test distance: 80km

◆ Blind area of reflection: < 3m

◆ Distance accuracy: ± ( 1m+*0.1%*distance)

◆ Plush width: Auto

◆ Dynamic Range: 20dB

◆ Graphical interface: support

◆ Support detection of line total loss, events point loss and attenuation values per kilometer 


General Characteristics

◆ Can store 1000 test results, can be displayed or printed on the screen

◆ 5 inches high resolution color LCD display, touch screen, with LED backlight

◆ Internal battery: intelligent lithium battery 8000 mAh, 12.6V

◆ Battery operating time: 4 hours; Charging time: 5 hours

◆ Charger: 12.6V @ 3A, 90- 265VAC, 50-60Hz 


Environment

◆ Operating temperature: 0 ° C -50 ° C

◆ Storage temperature: -20 ° C - + 70 ° C

◆ Temperature: 5% - 90% non-condensing

◆ Size: 230mm x130mmx60mm

◆ Weight: 2.5 kg 

Copyright ©2005 - 2013 深圳市同启通讯技术有限公司
犀牛云提供企业云服务
ADD : 4F East, BLDG, MinQi Technology Park, Xili Town,
        Nanshan District, 518055, Shenzhen, China
E_mail : oversea-sales@tongqitele.com.cn





Fax :
0755-82784711

 
邮编:330520
  • Name:
  • *
  • 公司名称:
  • *
  • 地址:
  • *
  • 电话:
  • *
  • 传真:
  • *
  • E-mail:
  • *
  • 邮政编码:
  • *
  • 留言主题:
  • *
  • Message:
  • *
FEEDBOOK  
Our Attention  
  • 手机网站
  • 官方微博